1. Turn your Tracers ON
Press the ON button on the bottom right hand side of the case. Wait until all Tracers finish starting up and are blinking red.
It will take about 10 seconds for the Tracers to blink red.
2. Scan your Trace Case ID
Use your phone’s built-in camera to scan the barcode ID on your Trace case.
3. Hand out Tracers
Your app will show every Tracer number assigned to every player you entered into the roster.
The Tracers are programmed to auto-shutdown after 180 minutes. If your game could go into extra innings, please distribute the Tracers no more than 15-20 minutes prior to the first pitch.
4. Wearing your Tracer
Have each player check that their Tracer is blinking red. Have the player put the Tracer in their back pocket.
(If your team has players that are younger than 12, we recommend you follow these steps for distributing your Tracers.)
5. Set up camera along a baseline
Between home and the base.
6. Press the power button to turn your TraceCam on
When the camera is ready, the record lights will flash red.
The camera will tell you when it’s turned on.
7. Scan your camera ID
Use the QR reader or type it in manually.
8. Raise & aim the tripod
The optimal camera height is 8-12 feet. Align the flat back of the camera parallel to the sideline.
If your tripod or mount is less than 6 feet off the ground, please tilt the camera upwards.
9. Connect the camera to Preview
Adjust your aim based on the preview. You want to see as much sky as possible, without cutting off any of the field.