Set Up Equipment

This is my TraceCam.  Switch

1. Open your Trace Teams app

Go to equipment tab (the case icon on the bottom right of your screen.) Tap “set up equipment”.

Select your camera (teal camera).

2. Scan your case and camera

Scan the QR codes on your case and camera. Once you scan a code, a green checkmark will appear below each device.

3. Plug camera into power

4. Plug camera into ethernet

Connect your camera to your router via the ethernet cable provided.

Your camera will now connect to the server automatically. This may take a minute or two.

5. Plug your case into power

6. Press the Upload Button

Press the Upload button at the top left-hand corner of your Trace Case. The case takes 30-60 seconds to power up. 

When the case is on you will notice that the Transfer icons are blinking and the Tracer lights are blinking.

7. Your case will pair with your camera

This will happen automatically. You can monitor the status in the app.

8. That’s it!

Your equipment is now paired. The next time you plug in your equipment, this will happen automatically.